Posts by gladesville

How Buying a Fridge with Ice & Water Dispenser Could Cause a Kitchen Renovation Blowout!

Posted by on Jun 15, 2019 in Blog | 0 comments

How Buying a Fridge with Ice & Water Dispenser Could Cause a Kitchen Renovation Blowout!

The modern kitchen will have the latest and greatest in technology when it comes to appliances. One of those appliances known for its ingenuity is the fridge with ice and water dispenser. Not only can the fridge control the temperature of your food, it can dispense filtered cold water and ice with the press of a button.

But there are plumbing questions to ask when purchasing such a fridge. If you have a new build kitchen, considerable planning can be made for the water and electrical services.

However, if you are renovating an existing kitchen to gain profit for the potential sale of a home, this high-end appliance may give you more headaches than it’s worth.

You can purchase a plumbing-free fridge, which uses a water tank to make the ice and water. The disadvantage of this design is the tank has to be manually refilled. Also, consumers have complained the tank water produces a stale, fridge-like taste when dispensed. To avoid drinking water with a ‘fridge flavour,’ a fridge that requires a separate water connection is the best. 

Here are some plumbing points to consider when installing a fridge with ice and water dispenser.

fridge with ice and water dispenser

A water line may be difficult to install in an existing kitchen

It’s a pretty basic concept that a fridge that dispenses water will require its own water feed. This connection can be teed off the existing water line under the sink. The location of the sink to the fridge can make this installation a nightmare, especially if there is cabinetry or other appliances like an oven in the way. A plumber will charge considerable labour time and materials to run a water line to the fridge.

In some kitchens, the water feed is impossible to install as there may be open space or no cabinetry or walls to run the water line on. In this situation, it may be best to purchase a fridge without a water dispenser and install a filtered tap at the sink instead.

The fridge will need extra space for a water point connection

The space allocated for the fridge may be adequate, but when allowing for a water line, pressure limiting valve and water filter, these important plumbing fittings will take up space in the fridge cavity.

Each fridge will have its different requirements for installation. It is important to check the measurements of the fridge and make an allowance for water connections for the ice and water dispenser. The sales rep at the appliance store will be able to guide you on the best model for your space needs.

The cost of installing a fridge with ice and water dispenser can be difficult for a plumber to estimate as every kitchen layout is different from the other. The friendly team at Gladesville Plumbing can take a look at your kitchen and offer advice on the best way to run the cold water pipe to give you the necessary connection.

Need a quote for installing a fridge with ice and water dispenser? Contact Gladesville Plumbing.

Read More

Choosing Your Kitchen Sink Taps Can Make Or Break Your Renovation

Posted by on May 15, 2019 in Blog | 0 comments

Choosing Your Kitchen Sink Taps Can Make Or Break Your Renovation

The kitchen sink is the most frequently used part of your kitchen. It’s the hub for collecting dirty dishes and utensils, washing said dirty dishes, as well as an access point for water used for drinking and food preparation. It’s also one of the design points that can bring interest to a kitchen. The kitchen sink tap you choose needs to be practical, suit the water layout at your sink and match the style of your kitchen. There are 5 things to consider when choosing kitchen sink taps for your kitchen renovation.

1. Bench mounted mixer tap or wall mounted taps?

It’s important to choose the right tap to suit the correct configuration of water connections at your sink. A complete kitchen renovation will have the water points located underneath the sink. This is ideal for a kitchen mixer tap.

If the water points come through the wall above the sink, a wall mixer or wall-mounted hot and cold taps will be required for installation.

2. Choose function over looks

Most kitchen renovations will opt for a mixer for their kitchen sink tap. The lever makes the tap easy to turn on and off when prepping food. If the water points penetrate through the wall above the sink, your plumber will be able to relocate them under the sink to suit a mixer tap.

The best kitchen taps are chrome or have a metallic finish. White and matte black mixers can look great when installed new, but after use, they can show marks through wear and tear. Always choose an electroplated mixer when purchasing a block coloured mixer tap.

3. Ensure there is enough bench support for your chosen mixer

Veggie spray mixer taps are a popular choice in modern kitchens. They certainly make a design statement and allow ease of use when spraying food or clearing dishes. The heavier mixer taps will require extra support underneath to carry the additional weight. Installing this style of mixer is best suited in the bench top as opposed to on the sink mount.

4. Check the lever of your mixer tap won’t hit the splashback or adjacent walls

There are so many designs of kitchen mixers to choose from, but it’s best to choose a mixer where the lever can be configured away from the wall if your kitchen sink has a splashback. There is nothing worse than a handle that can only provide hot water because the wall is in the way when turning on the cold.

5. Warranty is with the manufacturer, not the plumber

It’s important to understand how long the warranty is for the tap you choose and what it includes. Most kitchen mixers will have a one-year warranty for parts and labour. After that one-year period, if the mixer is faulty, the parts will be covered by the manufacturer (if it is still under warranty) and labour will be at your cost, not the plumber’s.

The right kitchen sink tap is a matter of personal choice. A plumbing supply showroom is the ideal place to choose the sink tap that’s right for you.

For all your kitchen tap installation needs, contact Gladesville Plumbing. Our team are experienced with the installation of all types of kitchen sink taps.

Read More

How to Recognise Different Pipes BEFORE You Make a Costly Mistake

Posted by on Apr 15, 2019 in Blog | 0 comments

How to Recognise Different Pipes BEFORE You Make a Costly Mistake

It takes all sorts of pipes to plumb a house. But every house, no matter where it is located in Sydney, will have three pipe systems.  It’s important to know the different pipes in your house so you understand how the plumbing works in your property. This knowledge can also help you when you have to explain to your plumber the reason for your call out. This information is crucial in giving the plumber a heads up on what materials will be needed to fix your plumbing problem.  

Legally, the only person who should be interfering with the pipes on your property is a licensed plumber. Often mistakes can occur when the wrong pipes are connected together. This can result in hefty fines from the local council if you get found out.  

Guide to different pipes in your house

Waste Pipes

Waste pipes are the pipes that carry waste water to the sewer. Typically, a waste pipe will connect from the waste outlet of a fixture and travel to a main sewer waste that connects into the local sewer line on your street. For modern or newly renovated homes, this waste pipe will be white PVC. It will be sewer grade PVC when underground.

Older homes dated in the pre-1960’s may have copper, cast iron or clay waste pipes. Often these waste lines are replaced with PVC during a renovation. Occasionally, plumbers will come across these older pipes if the house hasn’t been updated since its construction.  

Water Pipes

Water pipes, as the name suggests, carry potable water (drinking water) to various taps in the house. This water can be carried in pipes made from galvanised steel, copper or plastic pipe known as PEX (cross-linked polyethylene) or PB (polybutylene).

Copper is the most common water pipe in homes, but homes built from the 2000’s onwards will have their water lines run with PEX or PB.

Plastic pipes have their own regulations and rulings on where they can be installed in a home. For example, they must be lagged when run underground and they cannot be installed outside where they can be hit by UV rays.

There are pros and cons for plastic and copper pipe use for water lines in a house. A plumber will have the know-how on what fittings are needed to adapt from one pipe material to another.

Stormwater Pipes

Stormwater pipes are connected to the roof drainage that directs rainwater away from the house to stormwater drains. These pipes will always be 90mm-100mm PVC pipe.

It is common for stormwater and sewer waste pipes to be incorrectly identified. When this happens, the wrong pipes can be interconnected and result in waste water travelling through the incorrect drainage system. This can become a health issue if sewerage is connected to the stormwater. This is why using a licensed plumber for all your waste and water pipe connection is important.

Natural Gas or LPG Pipes

Gas pipes can be galvanised steel pipes, copper pipes, nylon and PEX-AL-PE Composite pipes. The plastic or composite pipes will often be yellow or orange in colour, which differentiates its use for the application of gas installations. It’s a more durable pipe and does require specific fittings and tools to install and maintain.

Recycled water Pipes

Recycled water pipes will be copper or PEX pipe in the colour of purple (lilac). If your plumbing problem is in relation to recycled water pipes, identifying the right pipe material can give a plumber a head start in knowing what tools and fittings will be needed for the job.

Not an expert on pipes in plumbing? That’s okay – we are! Call Gladesville Plumbing today – our team of licensed plumbers can help.

.

Read More

How Likely IS It That I’ll Find A Snake In My Toilet Bowl?

Posted by on Mar 27, 2019 in Blog | 0 comments

How Likely IS It That I’ll Find A Snake In My Toilet Bowl?

We’ve all seen or heard about the movie Snakes on a Plane, but in recent weeks, ‘snake in toilet bowl’ has made the national news.

This startling headline is not new, but it is becoming more common each summer in Australia.   Snakes can not only find their way into your toilet bowl, they can swim through sewers and contort themselves through the s bend of your toilet pan to say hello. Freaked out yet? Let’s see how common it is to find a snake in your toilet bowl and what to do if you find one peeking under the toilet seat.

How do snakes get into the toilet? 

Surprise! Snake in the toilet bowl!

There are two ways for a snake to get into a toilet.

The first is through an opening in your house like an open window or sliding door. When it’s especially hot and dry in summer, snakes will look for water and the toilet bowl is the ultimate watering hole.

The second way snakes can get into a toilet is through an opening in the sewer. Sewers can be a hiding ground for mice and rats. Snakes will enter the sewer to get their next meal. They can make their way through a sewer and slither their way through the s bend of a toilet.

How often do snakes end up in toilets?

It’s a fairly rare occurrence for snakes to end up in a toilet. Most snake handlers retrieve snakes from backyards or in bedrooms, rather than from the toilet. However, the heat can make snakes come out more frequently, so the occurrence can increase if you haven’t put prevention mechanisms in place to deter a snake entering your home.  

How to prevent a snake curling up in your toilet bowl

The best ways to prevent a snake making its way into your toilet is to make your home less attractive to the snake in the first place.

  • Keep windows and sliding doors in the bathroom closed or ensure the screens are fully intact so a snake can’t slide its way in.
  • Prevent a mouse or rat infestation in your home with the correct rodent protection. Snakes will follow the food trail, so if you have mice or rats near or in your house, get rid of them ASAP.
  • Ensure your ORG has the inserted grate and is not left open for a snake to enter.
  • Ensure seals on garage doors and any openings into your house are maintained.

What to do if you find a snake in your toilet

If you find a snake in your toilet, your local plumber is not the right person to call. You will need to call your local wildlife snake catcher.

Once the snake has been caught, Gladesville Plumbing can come to inspect the toilet. A drain camera can be placed down the toilet and sewer to ensure there are no baby snakes slithering about.

Found something scarier than a snake in the toilet? Contact the team at Gladesville Plumbing. We’re only a call away to help with all your plumbing needs! 

 

Read More

Common Issues Plumbers in Marsfield Fix Regularly

Posted by on Mar 15, 2019 in Blog | 0 comments

Common Issues Plumbers in Marsfield Fix Regularly

A local plumber is the best person to call when a plumbing emergency crops up from nowhere. Plumbers in Marsfield come across similar plumbing problems, household to household. While the problems can be avoided with education on domestic use, some issues are caused by lack of maintenance and upgrades to the existing plumbing services to the property.

If you live in Marsfield, here are some of the common plumbing problems your plumber will find via the two highly trafficked rooms in your home.

Bathroom Plumbing Problems

The two main plumbing problems in bathrooms in Marsfield are leaks and blockages.

Bathroom Blockages

The waste pipes connecting the basin, shower and bath to the floor waste are often a smaller diameter (between 32 to 40mm and the shower having a 40-100mm diameter depending on the age of the home). Often these pipes become clogged with hair, shampoos and conditioners and any hygiene products that get washed down. It is a common occurrence for these fixtures to block over time. The best way to unblock any fixture in a bathroom is by calling a plumber, who will use a sani-snake and ensure the pipe is clear from the fixture to the floor waste. For blockages that are difficult to dislodge, a jet rodding machine may be needed.

Toilet blockages can usually be unblocked with the use of a plunger. In some cases, plunging rods or a jet rodder may need to be used. A plumber will own all of these tools and equipment, which makes them the best person to handle the job.

Water Leaks

Water leaks are a plumbing emergency that needs urgent attention to prevent further water damage in your property. A water leak can spring from a welded joint in the wall that has cracked due to ground movement or the bursting of a chrome flexi hose under a basin. A water leak in the bathroom can always been managed by turning the water off at your meter. Your Marsfield plumber may need to turn the water back on to locate the leak if it’s not obvious.

Leaking toilets will often need to be inspected to work out what needs to be replaced to fix the leak. Not all toilets are the same, so calling a plumber to investigate will save you the time and hassle of working out how to fix the toilet leak.

Older homes can also experience water leaks from the shower tray. This type of leak is a sign a full renovation of the bathroom may be needed to restore the water proof membrane in the bathroom.

Kitchen Plumbing Problems

Just like the bathroom, your kitchen can also experience blockages and leaks at the kitchen sink. Never pour fats and oils down the kitchen sink as this can solidify in cooler months causing an unwanted blockage.

The most common taps in the kitchen are a sink mixer. These taps are always connected to the water supply with flex hoses. Regularly check the hoses for fraying, and call your Marsfield Plumber to replace if you can see rust. This is a sure sign it may burst in the future.

Dishwashers can also be a pain point in the kitchen, as no one likes washing by hand when the dishwasher can’t be used. Plumbers can only plumb a dishwasher in by putting water into the appliance and connecting the waste hose to the sink waste. If the dishwasher stops draining or malfunctions, it’s likely you will need an appliance repairer, rather than your plumber to fix.

The plumbing problems experience by Marsfield residents can be resolved with a call out to your local Marsfield Plumber.

When it comes to experienced plumbers, Marsfield residents rely on Gladesville Plumbing. Call us today for friendly and professional service.

 

Read More